Monthly Archive: June 2019

1

Alignment (Part 4)

After dialing in the camber settings, the next job was to set the toe-in.  The same Tenhulzen equipment is used for the toe measurement but now the two plates are placed against each wheel...

0

Alignment (Part 3)

Remember I said camber adjustment on the 308 is a pain… Well, it really proved to be exactly that. I went back and measured the wheel that was previous -1.95° and found it had...

2

Alignment (Part 2)

Lots of websites describe camber, how to measure it and how to change it but very few seem to actually discuss why one car’s recommendation might be for 0° but another car calls for...

2

Alignment (Part 1)

My car was in need of an alignment. I had not had one performed since replacing all the bushes and lowering the car last year. After lowering, it drove pretty well and tracked straight...